Repeat Play; To Listen To Specific Cds And Tracks (Cd Play Mode Function); Program Play - Panasonic SC-AK220 Instrucciones De Funcionamiento

CDs
DISC
PROGRAM
PLAY MODE
REPEAT
DEL
L, CLEAR
ALBUM ( or )
INTRO
MARKER

Repeat play

Remote control only
Press [REPEAT] during play.
" " is displayed.
To cancel repeat play
Press [REPEAT] to clear "
Note
You can use repeat mode with program play (A see right) and CD
play mode (A see below) functions.
To listen to specific CDs and
tracks (CD Play Mode function)
a ALL-DISC:
Plays all loaded discs in succession from the
selected disc to the final disc \.
b 1-SONG:
Plays one selected track on the selected disc.
c 1-ALBUM:
MP3 Plays one selected album on the selected disc.
d 1-RANDOM:
CD Plays one selected disc in random order.
e A-RANDOM:
CD Plays all loaded discs in random order.
f 1-DISC:
Plays one selected disc.
Remote control only
Preparation: Press [:/J, CD] and then [L, CLEAR].
CD
1
Press [PLAY MODE] to select the desired mode.
Every time you press the button:
→
a ALL-DISC b 1-SONG
∧
Proceed to step 4 when you selected A-RANDOM in step 1.
2
Press [DISC] and
the disc.
The CD starts.
3
Only when you selected
Press the numbered buttons to select the track in
the current disc.
To select track 10 or over, press [X10] and then the two digits.
Play starts from the selected track.
4
Only when you selected "A-RANDOM" in step 1
Press [:/J, CD] to start play.
MP3
1
Press [PLAY MODE] to select the desired mode.
Every time you press the button:
→
a ALL-DISC b 1-SONG
∧
f 1-DISC
2
Press [DISC] and
the disc.
The CD starts.
3
When you selected "1-ALBUM" or "1-SONG" in step 1
Press [ALBUM (
Play starts from the first track of the selected album.
4
Only when you selected
Press the numbered buttons to select the track in
the current album.
To select track 10 or over, press [X10] and then the two digits.
8
To select track 100 or over, press [X10] twice then the three digits.
Play starts from the selected track.
RQT7533
Numbered
buttons
-/J, CD
CURSOR ( or
g
, REW/3,
f , 4/FF
ENTER
TITLE SEARCH
CD MP3
" .
CD MP3
→ →
d 1-RANDOM e A-RANDOM
<
f 1-DISC
[1]–[5] to select
(within 10 seconds)
"1-SONG"
in step 1
→
c 1-ALBUM
<
[1]–[5] to select
(within 10 seconds)
or )] to select the album.
"1-SONG"
in step 1
To stop play
Press [L, CLEAR].
When playback ends
The current play mode will be retained in memory until it is changed
even if the unit is turned off.
\ Final disc
For example, if play starts from disc 4, disc 3 will be the "final disc".
Order of progression: Disc 4z5z1z2z3
),
L When "NOT MP3/ERROR1" appears on the display
MP3
An unsupported MP3 format is being played. The unit will skip that
track and play the next one.
Note
•
You cannot use program mode together with CD Play Mode function.
•
During 1-ALBUM mode, track skipping can only be done
MP3
within the current album.

Program play

You can program up to 24 tracks.
Remote control only
CD
Preparation: Press [: : : : : /J J J J J , CD] and then [L, CLEAR].
1
Press [PROGRAM].
"PGM" appears.
2
Press [DISC] and
the disc.
3
Select the tracks with the numbered buttons.
To select track 10 or over, press [X10] then the two digits.
Repeat steps 2 and 3 to program other tracks.
4
Press [:/J, CD] to start play.
MP3
Preparation:
1. Press [DISC] and (within 10 seconds) [1]–[5] to select the disc.
2. Press [L, CLEAR].
1
Press [PROGRAM].
"PGM" appears.
2
Press [ALBUM (
To select an album directly, press the numbered buttons
after pressing [ALBUM (
To select album 10 or over, press [X10] once then the two digits.
To select album 100 or over, press [X10] twice then the three
digits.
3 Press [ g, REW/3] or [f, 4/FF] to select the track.
To select a track directly, press the numbered buttons after
pressing [ g, REW/3] or [f, 4/FF].
To select track 10 or over, press [X10] once then the two digits.
To select track 100 or over, press [X10] twice then the three
digits.
4
Press [ENTER].
Repeat steps 2 ~ 4 to program other tracks.
5
Press [:/J, CD] to start play.
To exit program mode
Press [PROGRAM] in the stop mode. (You can replay your program
by pressing [PROGRAM] then [:/J, CD].)
You can do the following while "P"
is displayed
•
To check program contents
Press [g, REW/3] or [f, 4/FF].
Every time you press the button:
CD The track number and program order are displayed.
Track number
Program order is displayed, then album number and track
MP3
number.
CD MP3
[1]–[5] to select
(within 10 seconds)
or )] to select the album.
or )].
Program order