Wood Stud Installation - SANUS VuePoint FMF319-B2 Manual Del Usuario

STEP 2A Attach Wall Plate
CAUTION:
Avoid potential personal injury or property damage!
• Drywall covering the wall must not exceed 5/8 in. (16 mm)
• Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1½ x 3½ in. (38 x 89 mm)
• Stud center must be verified
1
Max.
5/8 in. (16 mm)
4
6
2
07
A
08
08

Wood Stud Installation

5
CAUTION:
Avoid potential personal injury or property damage!
Improper use could reduce the holding power of the lag bolt
Tighten the lag bolts only until the washers
09
wall plate 08 . DO NOT over-tighten the lag bolts
3
07
2 ¾ in. (70 mm)
08
09
09 .
10
are pulled FIRMLY against the
09 .
7/32 in.
(5.5 mm)
10
Go to STEP 3 on PAGE 8.