Technical Data; Use And Application / Operating Instructions; Commissioning; Time Setting - Pepperl+Fuchs ecom Ex-Time 40 Instrucciones De Uso

1. Technical Data

Ambient temperature Ta:
Storage temperature:
Battery / power supply:
Battery operating time:
Accuracy of quartz mechanism:
Dimensions:
Weight (incl. batteries):
CE labelling:

2. Use and Application / Operating Instructions

Before use, please read these operating instructions very carefully in order to famili-
arise yourself with the functions of the Ex-Time 40. For you own safety and informa-
tion, please read the following instructions.

2.1 Commissioning

Use an appropriate screwdriver to undo the two screws on the battery compartment
cover (on the opposite side from the quartz mechanism). Remove the battery com-
partment cover and insert a battery of the correct type (LR14) (see Ex-Safety manual
under point 5. table with type-tested batteries) into the battery compartment. Please
refer to the diagram on the housing to make sure that battery is inserted with the
correct polarity. Refit the battery compartment cover (the spring faces towards the
battery), refit the battery compartment cover screws and tighten securely. Then use
the white adjusting wheel on the housing of the clockwork mechanism in order to
set the correct time.

2.2 Time Setting

The white adjusting wheel on the quartz mechanism is used to make any necessary
time adjustments.

3. Disposal

Old electrical devices by ECOM Instruments GmbH will be directed to disposal
at our expense and disposed of free of charge in accordance with European Directive
2012/19/EU. Please follow local regulations for the disposal of electronic products.
The costs associated with returning devices to ECOM Instruments GmbH are to be
borne by the sender.
8
0°C ... +50°C
0°C ... +50°C
1 x LR14 acc. to IEC
approx 2 years
+15/-5 seconds per month
400 x 60 mm
2.0 kg
0102