Installation; Installing The Appliance - miogo MMWG251 Manual De Uso

2 MIOGO_EN230_25LGRILL_SBI_BASE_AO33UICTO_Layout 1 10/09/2021 09:12 Page 27

2. INSTALLATION

2.1 Installing the appliance
1. Remove all packaging and check carefully
for any signs of damage.
2. Fit the fixing bracket to the right hand side of
the kitchen cupboard using the installation
sheet and two screws supplied.
3. Fit the appliance into the kitchen cupboard
slowly and without force until it clips into the
brackets. Ensure the appliance is stable and
centralised.
4. Fix the oven on the left hand side using the
two screws supplied.
5. The front frame of the appliance should seal
against the front opening of the cupboard.
IMPORTANT!
Do not install this appliance in kitchen
cupboards without the specified 45mm rear
chimney. Inadequate ventilation could adversely
affect the performance and life of the appliance.
>
0
388
3,5
4,5
ENGLISH 27