Technical Specifications; Instructions For Installation - KEKAI NOVA SLIM Manual De Instrucciones

IN CASE OF GAS LEAK:
Immediately close the cylinder valve if gas odor is detected.
 Extinguish any naked flame.
 Do not try again to turn on the unit.
Do not touch any electrical switch.

 Do not use a telephone in your apartment / house.
 Contact the gas supplier or our after-sales service or our dealer and follow their instructions.

TECHNICAL SPECIFICATIONS:

Full gas model:
Gas: LPG (Liquid Petroleum Gas G 30
Gas pressure: 28 to 30 mbar
Category: I3 +
Nominal flow (Max): 4.2 kW - 305 g / h
Average flow: 2.8 kW - 205 g / h
Minimum flow rate: 1.6 kW - 117 g / h
3 injectors with a diameter of 0.59 mm
Ignition: piezo - electric
Safety device (ODS): 1112A
Gas Cylinder: 10 kg (Max)
Gas and electric model:
Gas: LPG (Liquid Petroleum Gas G 30
Gas pressure: 28 to 30 mbar
Category: I3 +
Nominal flow (Max): 4.2 kW - 305 g / h
Average flow: 2.8 kW - 205 g / h
Minimum flow rate: 1.6 kW - 117 g / h
3 injectors with a diameter of 0.59 mm
Ignition: piezo - electric
Safety device (ODS): 1112A
Gas Cylinder: 10 kg (Max)
Quartz heating capacity: 400/800/1200W
Valtage/Frequency: 220-240V/50-60HZ

INSTRUCTIONS FOR INSTALLATION:

 Remove the appliance from its packaging.
 Mount the different parts of the appliance according to the illustrations in the appendix.
 Assemble the individual panels with the supplied screws.
Set the control knob to the (O) or OFF position.

Fit the gas hose with the appliance connection and tighten with a clamp.

 Use a regulator with a fixed setting of 28 to 30 mbar and a flow rate of 1000 to 1500g/h.
 Fit the other end of the special gas hose to the regulator outlet and tighten with a collar. The hose
must have a length of 0.50 to 1.00 mtr.
 Fit the regulator on the gas cylinder (10kg) and tighten it properly.
 Open the cylinder valve and check the seal with soapy water.
13