Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

CAUTION – RISK OF SHOCK –
Disconnect Power at the main circuit breaker panel or main fuse
box before starting and during the installation.
1)
Attach mounting plate to outlet box with the mounting
screws provided. The fixture must be mounted vertically.
2)
Attach the grounding conductor to the mounting plate. Se-
cure by tightening the green ground screw. Never connect
black or white power supply wires to the grounding screw.
3)
Grounding instructions: (See Illus. A or B)
A)
On fixtures where mounting strap is provided with a
hole and two raise dimples. Wrap ground wire from
outlet box around green ground screw, and thread into
hole.
B)
On fixtures where a cupped washer is provided. Put
ground wire from outlet box under cupped washer
and green ground screw and thread screw into hole in
mounting strap.
If fixture is provided with ground wire. Connect fixture
ground wire to outlet box ground wire with wire connector,
after following the above steps. Never connect ground wire
to black or white power supply wires.
A
WIRE CONNECTOR
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
GREEN GROUND
SCREW
Date Issued: 06/13/16
B
FIXTURE
GROUND
OUTLET BOX
GROUND
CUPPED
GREEN GROUND
WASHER
SCREW
FIXTURE
We're here to help
4)
Make wire connections with provided connectors. Connect
black wire to black wire. Connect white wire to white wire.
Connect Black or
Red Supply Wire to:
Black
*Parallel cord (round & smooth)
Clear, Brown, Gold or Black
without tracer
Insulated wire (other than green)
with copper conductor
*Note: When parallel wires (SPT I & SPT II)
are used. The neutral wire is square shaped
or ridged and the other wire will be round in
shape or smooth (see illus.)
5)
Carefully push wire connections back into outlet box
making sure all connections remain secure.
6)
Carefully push fixture to wall over mounting plate. Secure
fixture to mounting plate by using fixture mounting screws.
(2)MOUNTING
SCREWS
(4)FIXTURE
MOUNTING SCREWS
866-558-5706
Hrs: M-F 9am to 5pm EST
Connect
White Supply Wire to:
White
*Parallel cord (square & ridged)
Clear, Brown, Gold or Black
with tracer
Insulated wire (other than green)
with silver conductor
Neutral Wire
MOUNTING
PLATE
OUTLET BOX
IS-49785-US

Publicidad

loading

Resumen de contenidos para Kichler 49785

  • Página 1 Carefully push fixture to wall over mounting plate. Secure OUTLET BOX fixture to mounting plate by using fixture mounting screws. DIMPLES GROUND CUPPED GREEN GROUND GREEN GROUND WASHER SCREW SCREW FIXTURE MOUNTING PLATE OUTLET BOX (2)MOUNTING SCREWS (4)FIXTURE MOUNTING SCREWS Date Issued: 06/13/16 IS-49785-US...
  • Página 2 TIERRA DE LA CAJA DE SALIDA DEPRESIONES TORNILLO DE TIERRA, ARANDELA TORNILLO DE TIERRA, VERDE CONCAVA VERDE ARTEFACTO PLACA DE MONTAJE CAJA DE SALIDA (2)TORNILLO DE MONTAJE (4) TORNILLOS DE MONTAJE DE LA LUMINARIA Date Issued: 06/13/16 IS-49785-US...
  • Página 3 (SPT I et SPT II). Le fil neutre est á angles droits ou strié et l’autre fil doit étre rond ou lisse (Voir le schéma). Fil Neutre LUMINAIRE PLAQUE DE MONTAGE BOÎTE À PRISES (2)VIS DE MONTAGE (4)VIS DE FIXATION DE LUMINAIRE Date Issued: 06/13/16 IS-49785-CB...