Fulgor Milano INCOGNITO 70 Instrucciones De Uso Y De Montaje página 15

MAINTENANCE
An accurate maintenance guarantees good fun-
ctioning and long-lasting performance.
Particular care is due to the grease filter panel.
Before removing the grease filter, it is necessary
to open the light panel by rotating it downwards
as per Fig. 1.
The grease filter needs cleaning by regular hand-
washing or in dishwashers every two months at
least or depending on its use.
* In case the appliance is used in its filtering ver-
sion, the active coal filter
needs to be periodically replaced. The coal filter
can be removed by removing the grease filter
first, and by pulling its special plastic tongue until
it is un-fastened from its slot. Reinsert the coal
filter by operating in the opposite way. The coal
filter needs replacing depending on the use, at
least once every six months.
To clean the appliance, tepid water and neutral
detergent are recommended, while abrasive pro-
ducts should be avoided.
Replacement of LED Lamps
If there is no access to the rear, use a tool with
a fine tip and insert it between the lamp and the
canopy of the hood, where the two retaining tabs
are located; then, press and release the lamp
(Fig. 8).
14