HURAKAN HKN-ICF18T Manual De Instrucciones página 24

EN
pressing the TIMER button again. "0:" will start blinking, then turn the knob if you need to set
a certain number of hours of the burner operation. Wait for 5 seconds, then the timer value
will be fixed and the countdown will start on the screen. The timer can be set up to 24 hours of
operation. If you need to deactivate the timer, touch the TIMER button 3 times in succession.
5. Press the control button after cooking is finished, and the OFF sign will appear on the dis-
play. Remove the dishware from the burner only after it is turned off.
6. Wait for the cooling fans to stop working and shut off the power supply.
1. The signal lamp MAINS will light up and the OFF sign will appear on the display after con-
necting the unit to the mains.
2. Place the dishware on the burner.
3. Press the ON/OFF button to turn on the cooker , and ON sign will appear on the dis-
play. The burner will start heating the dishware at 2,000 W.
4. Select the desired operating mode of the burner by pressing the corresponding button
(TIMER mode can work simultaneously with one of the POWER or TEMPERATURE modes):
- POWER mode. Press the +/- button to set the modes: 300, 500, 1,000, 1,500, 2,000,
2,500, 2,800, 3,000, 3,300, and 3,500 W.
- TEMPERATURE mode. Temperature will be set to 140°C after selecting this mode.
Press the +/- button to set 60, 80, 100, 120, 140, 160, 180, 200, 220, and 240°C.
- TIMER mode. "0:00" will appear on the display when this mode is selected, with ":00"
blinking. Turn the knob to select the number of minutes you need, then confirm the value by
pressing the TIMER button again. "0:" will start blinking, then turn the knob if you need to set
a certain number of hours of the burner operation. Wait for 5 seconds, then the timer value
will be fixed and the countdown will start on the screen. The timer can be set up to 24 hours of
operation. If you need to deactivate the timer, touch the TIMER button 3 times in succession.
5. Press the ON/OFF button after cooking is finished , and the OFF sign will appear on
the display. Remove the dishware from the burner only after it is turned off.
6. Wait for the cooling fans to stop working and shut off the power supply.
24