Getting Started - Tivoli Audio BluCon Manual Del Usuario

All manuals and user guides at all-guides.com
ABOUT TIVOLI AUDIO
Tivoli Audio was founded by Tom DeVesto with the mission of bringing simple to use, elegantly
designed, high quality audio products to consumers. As CEO and head of research and develop-
ment at his former company, Cambridge SoundWorks*, Tom was respon-sible for the development
of many of the best selling home entertainment and multi-media products on the market. He also
held senior management positions in product development at both Advent and Kloss Video.
*Cambridge SoundWorks is a registered trademark of Creative Labs, Singapore.
Packed with your BluCon you should find:
• One (1) External Power Supply
• One (1) 3.5mm Stereo Audio Cable
Please contact your dealer or Tivoli Audio if any of these items are missing.
FRONT VIEW

GETTING STARTED

Prior to pairing, verify your device supports Bluetooth Version 2.1+EDR A2DP and your device is
not connected to any other Bluetooth product. Devices may pair differently. Below is a general
guide.
1. Connect the included external adapter to the 5V input on the back of the BluCon and plug
the other end into a wall outlet. The Tivoli Audio logo will not illuminate until the BluCon
connects to a device via Bluetooth wireless technology. Use only the power supply pro-
vided with this product. Should the power supply become damaged or misplaced, use
only a like replacement. Use of any DC adapter not recommended by the manufacturer/not
meeting this specification may cause a safety hazard
2. Connect the included audio cable from the "Line Out" on the back of the BluCon to the
Auxiliary input on the back of your Tivoli Audio radio or other audio device. Turn the radio
(or other device) on and raise the volume about 1/4 to start. Also turn up the volume on the
source device (the device you are streaming from).
3. Turn on the Bluetooth wireless technology on your enabled device. Select "Tivoli Bluetooth
(Not Paired)" when it appears on your device's screen to initiate searching. Some devices
may prompt you for a PIN. If so, enter "0000". "Tivoli Bluetooth" will change from "Not
Paired" to "Connected". The Tivoli Audio logo will illuminate. You can begin playing your
music files wirelessly. Adjust the volume level on your device. You should not have to pair
your device again
4. Depending on your device, you may need to make multiple attempts at Pairing and/
or Connecting to the BluCon, but please give your device adequate time to Pair or
Connect before repeating the process.
6 – ENGLISH
5V 50m A
LINE OUT
REAR VIEW