Breo iNeck Air2 Manual Del Usuario página 7

Mode Selection button:
Short press this button to select from
the following modes.
Charging port
Mode button Charging light
Charging light indicator: Power On / Hot Compress Selection
/ Power Off button
The red light flickers during charging
and remains on upon full charging.
Long press the Power On/Off button to
power on/off the product; short press
this button for hot compress selection
Hot Compress On---Hot Compress Off
13
Power On/
Off button
EN Charging method
1 Open the external silicone plug in the port.
2 Insert the Micro USB connector on the USB connecting
cable to the Micro USB port on the main unit.
3 Insert the power adapter to the power outlet.
The main unit produce s the "be ep" sound; then the
charging light on the control panel flickers.
After charging, the charging light remains on.
※During charging, it is normal that the main unit and the
power adapter get heated slightly.
Charging time
1 It takes about 3.5 hours to fully charge the battery.
2 Upon full charging, the product can be used 10 times if it is
used for 10 min (MODE 1, MODE 2) or 30min (MODE 3) every
time.
(There might be slight difference due to the difference in
14