Leap PQ9907S Manual De Instrucciones página 6

3) Start Timing:
After exiting the parameters setting, press the key to start timing for
the bulge button side, press the key to pause the timer.
(The timing rules are described below).
3.1, Rule of running "count up timing":
In the initial screen (or when the time set to 0:00 00), press key to
start timing, the party who reach 9 hours 59 minutes 59 seconds first is losing
and timing stop, the other side has remaining time to continue counting time.
3.2, Rule of running "countdown timing": (bonus / delay are set to 0, only run
the countdown function).
When start timing, one party run out of time is losing and timing stop, the other
side has remaining time can continue counting.
3.3, Rule of running " countdown timing" + "bonus for every step": (Screen
show "bonus" in this mode).
Start timing, the timing party plus 1 bonus, click the ④ 【move】 key after one
step, switch to the other side to start timing and add 1 bonus. one party run out
of time is losing and timing stop, the other side has remaining time can
continue counting.
3.4, Rule of running "count down timing" + "delay for every step": (Screen
show "delay" in this mode)
Start timing, the counting party runs delay time first, when run out of delay time,
go to the count down timing. After one step, press the ④【move】 key, switch
to the other party to start timing. one party run out of time is losing and timing