Safety Precautions - HT 52 Manual De Instrucciones

1 SAFETY PRECAUTIONS

This meter is compliance with safety
Standard related to electronic measuring
instruments. For your own safety and to
avoid damaging the instrument follow the
procedures described in this instruction
manual and read carefully all notes
preceded by the symbol
Before and during measurements:
 Do not operate the probe under humid
or wet environment or in presence of
explosive gas (material), combustible
(material), steam or filled with dust
 Do not submit the probe to mechanical
shock
 Do not touch or manipulate the sensor
 Do not expose the sensor to static
electricity
 If the probe has been used for a long
time in critical environmental condition
(high Humidity, temperature, etc.), put
the probe in a atmosphere with
humidity below 40%RH for 24 hours
before use it again
 If
any
instrument
breakage,
fracture, etc., do not conduct any
measurement
The following symbols are used:
unusual
such
leakage
Caution: Refer to the instruction
manual.
damage the apparatus or its
components
DC Voltage
HT52 - HT52/05
condition
as
of
Incorrect
EN - 2
of
deformation,
substances,
use may
the