Preparation; Initial Use; Assembling The Lamp; Switching The Lamp On / Off - LIVARNO home 14153905L Instrucciones De Montaje, De Uso Y De Seguridad

Preparation

To pair the light with the smartphone you will need
a Gateway and the "Lidl Home" app.
Install the Gateway per the manufacturer
instructions.
Download the "Lidl Home" app from the App
Store.

Initial use

Note: Before first use, remove all packaging mate-
rials and remove the protective films from the light's
cover.

Assembling the lamp

(see Fig.)
Model 14153905L only:
Place the lamp body
in the base
. Ensure that the openings on the
3
assembly bracket
2
aligned precisely with the pre-drilled holes in
the base .
3
Screw the lamp body
do this, insert the screws
from underneath into the assembly bracket
and tighten the screws
hexagonal key .
5
Note: Make sure that the side with the foot
pad on the base
3
Plug the plug-in mains adapter
erly installed socket.
Your lamp is now ready to use.
Model 14154002L only:
Note: We recommend assembling this product
with two people.
Plug the connecting plug
unit into the connection socket
9
bottom lighting unit
Insert the top lighting unit
lighting unit . Ensure that the connection cable
12
is inserted in a loop in the bottom lighting
14
unit .
12
onto the pre-drilled holes
1
for the screws are
4
onto the base . To
1 3
through the base
4
with the help of the
4
is facing downwards.
into a prop-
8
of the top lighting
10
for the
11
.
12
into the bottom
9
Preparation / Initial use / Resetting the light
Note: Ensure that the connection cable
not crushed.
Secure the top lighting unit
lighting unit
12
the help of the hexagonal key
Place the assembled light onto the pre-drilled
holes in the base
on the bottom lighting unit
are aligned precisely with the pre-drilled holes
in the base
Screw the assembled light onto the base
do this, insert the screws
from underneath into the bottom lighting unit
and tighten the screws
hexagonal key
Note: Make sure that the side with the foot
pad on the base
Plug the plug-in mains adapter
erly installed socket.
Your lamp is now ready to use.

Switching the lamp on / off

Use the ON / OFF in-line switch
the lamp on or off.
3
2

Resetting the light

The light must be in learning mode to pair the light
with the app. This is indicated by the light flashing
regularly.
If the light does not automatically start flashing, re-
turn the light to learning mode. To activate learning
mode, switch the light on and off as follows:
‒ switch on
‒ 1 sec. off
– 1 sec. on
‒ 1 sec. off
– 1 sec. on
‒ 1 sec. off
– 1 sec. on
on the bottom
9
by tightening the screws
.
5
. Ensure that the openings
3
for the screws
12
.
3
through the base
4
with the help of the
4
.
5
is facing downwards.
3
into a prop-
8
7
is
14
with
13
4
. To
3
3
12
to switch
GB/IE 17