Checking And Settings - LEGRAND Audio Villa Celiane 633 01 Instrucciones De Montaje

Installing the entrance panel
Release the safety devices and sepa-
rate the trim. Take out the label-holder
and insert the label.
Place the module in the frame; withdraw the
entrance panel; open the entrance panel.

Checking and settings

The call is heard at the entrance panel
and the handset.
Set the volume at the handset level.
All manuals and user guides at all-guides.com
Flush mount the right part of the trim
and the spool. Pivot until it clicks. Put
the safety device in place.
Put the wires in the connector; connect
the connector.
Make sure that the volume is suitable for
both the entrance panel and the handset.
Check the door opening.
To install the entrance panel on the fl ush-
mounted box: release the frame and
screw up the hinges.
Screw the entrance panel on the fl ush-
mounted box; close the frame covers.
Set the volume at the entrance panel
level.
Check the label lighting.
23