Initial Use; Installation Location; Unpacking And Assembly - Beurer MC3000 Instrucciones De Uso

5.

Initial use

Warning!
• Keep packaging material away from children!
Choking hazard.
• Before using the device for the first time, read the
'Safety notes' section.
Safety notes, pages 12 and 13
w

Installation location

• Install the massage chair on a sturdy and even
surface.

Unpacking and assembly

The massage chair MC3000 is delivered in
a cardboard box.
Step 1:
Step 2:
Step 3:
Caution!
• The massage chair could damage your flooring.
Place a suitable, non-slip underlay under the
massage chair.
• Before using the device for the first time, remove all
obstacles in front of and behind the massage chair
so that the back rest can be lowered and the leg
rest raised freely.
Caution!
Do not use sharp or pointed tools (e.g. a Stanley knife)
to remove the packaging.
> Open the cardboard box and hold the massage chair at the
designated holding points
> Remove the chair from the cardboard box
Two people are required for this.
Carefully remove all the packaging material
>
Unfold the back rest to the upright position until the locking
>
mechanism audibly engages
The back rest now stands at approx. 115°.
> Lay the back cushion on the massage chair over the back rest
> Connect the back cushion and the back rest using the zip fastening
17