Features & Controls; Know Your Pressure Washer - Craftsman 580.752011 Instrucciones De Uso

KNOW YOUR PRESSURE WASHER

Read the Operator's Manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various
controls and adjustments. Save this manual for future reference.
Recoil Starter
Oil Fill Cap and Dipstick
Air Filter — Protects engine by filtering dust and
debris out of intake air.
Automatic Cool Down System — Cycles water
through pump when water reaches 125°-155°F. Warm
water will discharge from pump onto ground. This
system prevents internal pump damage.
Detergent Pick–Up Tube and Filter – Used to siphon
detergent from chemical bottle to the low pressure
water stream.
Fuel Cap – Fill fuel tank with regular unleaded fuel here.
High Pressure Hose (not shown) – Connect one end
to the spray gun and other end to the high pressure
outlet.
High Pressure Outlet — Connection for high pressure
hose.
Nozzle Extension with Quick Connect (not shown)
— Allows you to switch between four different nozzles.
FEATURES AND CONTROLS
Air Cleaner
Oil Fill Cap and Dipstick – Check and fill engine with
oil here.
Primer Bulb — Prepares a cold engine for starting.
Pump — Develops high water pressure.
Recoil Starter — Used for starting the engine
manually.
Spray Gun (not shown) – Controls the application of
water onto cleaning surface with trigger device.
Includes trigger lock.
Spray Tips (not shown) — Chemical injection, 0°,
15°, and 40°: for various high pressure cleaning
applications.
Throttle Control Lever – Sets engine in starting
mode for recoil starter and stops running engine.
Water Inlet — Connection for garden hose.
5
Throttle Control
Lever
Detergent Pick–Up
Tube and Filter
Primer Bulb
Fuel Cap
Water Inlet
High Pressure Outlet
Pump equipped with
Automatic Cool Down System