Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
How
to Use Accessory
Tray
The unit is equipped with an accessory tray with
places to store your spray gun and nozzle extension.
There is also a hook on the side of the handle to hold
your high pressure hose.
NOTE: The extra hole in the tray is for storing a utility
brush. The extra clip in the tray is for storing a turbo
nozzle. The brush and turbo nozzle are NOT included
with your pressure washer. You can buy these items
as optional accessories.
1.
Place nozzle extension through hole on accessory
tray, as shown.
.
Select desired spray tip:
•
For gentle rinse, select white 40 ° spray tip.
•
To scour surface, select yellow 15 ° or red 0°
spray tip.
•
To apply chemical, select black spray tip.
Low Pressure
Y/
Black
Use to apply
chemical
High Pressure
2.
Place spray gun through hole on accessory tray
on right side of unit.
3.
Hang high pressure hose on hook attached to
handle on side of handle as shown.
How to Use Spray Tips
The quick-connect
on the nozzle extension allows you
to switch between four different spray tips. The spray
tips vary the spray pattern as shown above.
CAUTION
• NEVER
exchange
spray
tips without
locking
the trigger
lock on the trigger.
Follow these instructions
to change spray tips:
1.
Engage trigger lock on spray gun.
2.
Pull back collar on quick-connect
and pull current
spray tip off. Store spray tips in holder provided on
the nozzle extension.
40 ° White
15 ° Yellow
0 ° Red
Usage Tips
•
Pull back on collar, insert new spray tip and release
collar. Tug on spray tip to make sure it is securely
in place.
•
For most effective cleaning, keep spray tip from
8 to 24 inches away from cleaning surface. If you
get spray tip too close, you may damage cleaning
surface.
•
DO NOT get closer than 6 inches when cleaning
tires.
11
Publicidad
Tabla de contenido
