Makita LC08 Manual De Instrucciones página 9

Install the capsule. Align the mark on the capsule with
the mark near the handle and then firmly twist the cap-
sule in direction of the arrow until it is secured.
1
► 1. Mark
1
► 1. Capsule 2. Handle 3. Mark
NOTE: Always remove dust ahead of time, as the
suction power will be reduced if there is too much
dust in the cleaner.
NOTICE:
Always be sure to check that both the
filter and prefilter are loaded correctly prior to
using the cleaner. If they are not loaded correctly,
dust will get into the motor housing, and cause a
motor failure. If the following examples occur, the filter
and prefilter are not loaded correctly. Reload them
correctly to rectify problem.
Problem Examples
Example 1: Only the prefilter has been loaded (no filter)
► 1. Prefilter
Example 2: Only the filter has been loaded (no prefilter)
► 1. Filter
2
Example 3: The filter has been loaded in a peeled back
state
3
► 1. Filter
9 ENGLISH
1
1
1