Operation - Use - Bestron PINK FLAMINGO AHD2200R Manual Del Usuario

OPERATION - General information
The appliance is intended only for domestic use, not for professional use.
1. Concentrator nozzle
2. Cool Shot-function
3. Heat switch - -
4. On/off switch 0 - -
5. Grid
6. Hang up loop
7. Power cord and plug
OPERATION - Before the first use
1. Remove the packaging.
2. Clean all the accessories to remove any residues that may be left from the manufacturing process (see
"Cleaning and maintenance").
The appliance may emit a little smoke and a characteristic smell when you switch it on for the first time.
This is normal and will stop on its own. Make sure there is sufficient ventilation.

OPERATION - Use

1. Place the concentrator nozzle on the hair dryer (see figure 2).
2. Make sure that the on/off switch of the appliance is set to 0 (Off).
3. Insert the plug in the wall socket.
4. Put the on/off switch on . Or for a harder blow power on
5. Adjust the heat with the heat switch.
= cold
= tepid
= hot
• In case of real wet hear, it is better to start with drying on a higher level. Switch the hair dryer on to
a less hot level as the hair become dryer.
• Dry your hair in front of the mirror is often a difficult task. Just try without looking in the mirror. Bend
your head a little bit forward so you can see what your doing. You will see, it works quite good!
• Don't put the mouthpiece too close to the hair
when the heat switch is on level III. This way
you can damage your hair.
6. Use the "cool shot" button to fixate the hair.
This function only works on positions
Never close the back of the appliance. This way it
can overheat.
2.
1.
7.
.
and .
19
EN
3.
4.
5.
6.