Remote Control Function
V-MODE:
Press repeatedly to switch the video output modes.
ZOOM:Press to zoom in/out the scene. In zoomed-in mode, the direction keys
can be used to move the zooming center. (Note: Applies to DVD, VCD, MPEG4,
etc.)
RIPPING:Press to access or quit the CD ripping menu. For details of CD ripping,
please refer to CD RIPPING in PLAYBACK chapter.
COPY:Press to copy from a multi-format disc to USB, for details, please refer to
USB DRIVE PLAYBACK in Basic Playback chapter.
Tuner Operation
The following buttons are used in tuner mode. Press [SOURCE]/[SOURCE
SELECT] to select tuner mode.
AM/FM:Press to switch between the AM mode and the FM mode.
MO/ST:Press to switch between Mono and Stereo
signal
in FM mode.
MEMORY:After tuning in a new frequency, press [MEMORY], then select a
preferred station by inputting the corresponding numbers to save it as a preset
station.
AUTO:Press to do auto scanning for the broadcasting radio channels.
During auto scanning, press to stop the process.
1 1
2 2
3 3
In tuner mode, the digit keys can be used to select a preset station.
5 5
4 4
6 6
For example, press [0] and [2] to select the 2nd station; press [1] and [5]
7 7
8 8
9 9
9 9
0/10
0/10
10+
10+
to select the 15th station.
SEARCH+/-:Press to fine tune (increase/decrease) the frequency manually.
RADIO+/-:Press to skip to the next/previous preset station.
NOTE: In tuner mode, [VOLUME+/-], [CH-LEVEL], [MUTE], [TONE] and
[S.EFFECT] buttons are also active. For details, please refer to the remote
control function introduction of the DVD part in this chapter.
reception of the broadcast
Page 17