CAUTION: Risk of overheating!
Keep the ventilation slots free!
If the heat generated by the operation is not properly dissipated, it
can result in overheating and fire.
The appliance is designed for the cooling of pre-cooled or for keeping
hot dishes and beverages warm.
It is intended for use in the household and in similar applications, such
as:
• In personal kitchen areas in shops, offices and other work areas;
• By guests in hotels, motels and other accommodation;
• In bed and breakfast accommodation;
• To use for camping;
• In motor vehicles.
It is not intended for the following use:
• In agriculture;
• In catering and similar wholesale use.
This appliance may not be exposed to the rain.
Supplied parts
1 Cooler box
1 Power cord for AC current 220 – 240 Volt
1 Car power cord for DC 12 Volt
1 Barrier strip
Unpacking the appliance
1. Remove the appliance from its packaging.
2. Remove all the packaging material such as plastic bags,
filler material, cable ties and cardboard packaging.
3. Check that all parts are supplied in the package.
NOTE:
The appliance may still contain dust or production residues.
We recommend that you clean the appliance as described
under "Cleaning".
Intended Use
General information
•
Never place the appliance next to naked flames or other
heat sources.
•
The lid is locked when the handle is pushed back and
when carrying.
•
To open the cooler box, pull the handle forward.
•
Do not open the lid more often than required. Do not leave
the lid open more often than is necessary. This will influ-
ence the duration of the cooling or keeping warm.
•
The duration of the cooling or keeping warm is also depen-
dent on the ambient temperature.
•
The appliance is not suitable for permanent operation.
•
The appliance can be connected to two different energy
sources.
-
Alternating current 220 – 240 V~ or
-
Direct current 12 V
Instructions
29