Glatz FORTANO Manual De Instrucciones página 29

29
4.2
g)
5.1 5.2
5.5
6.1
4.1
4.4 4.5
f a c i n
g
5x
b a c k
w a r d
s
5.3
5.6
6.2
5x
6.3 6.4
4
Pre-assemble standpipe
1. Pull standpipe out of the mast
2. Place parasol on standpipe
The side with the two thread holes
must face backwards (away from the
parasol)
3. Adjust holes / position
4. Place 5 washers in position
5. Pre-assemble standpipe with 5
hexagonal screws
!
The side with the two thread holes
must face backwards (away from the
parasol).
5
Pre-assemble parasol
1. Place parasol on standpipe
2. Attach parasol tightly to standpipe,
using 2 washers and 2 round-headed
screws
3. Put crank in place and screw tightly
4. Remove strap
5. Open parasol with the crank
6. Make sure that the inner parts are
engaging
!
The parasol is very heavy. Work
in a threesome and hold the parasol
securely.
6
Fixing the parasol in place
1. Make final adjustments of parasol
position
2. Fix parasol in place by tightening the
5 hexagonal screws
3. Push standpipe cover on both sides,
click into place
4. Push standpipe cover down as far as
it will go
5. Close parasol