GE 18 Manual Del Propietário página 21

INSTALL DOOR STOPS ON
9
THE LEFT
On each door, install the metal door stop on the left
side. Insert and tighten the screws.
Left Side
REHANG THE
10
REFRIGERATOR DOOR
A Lower the refrigerator door onto the bottom
hinge pin.
B Straighten the door and line it up with the center
hinge bracket.
C Reinstall the center hinge pin with a 3/8" (10 mm)
socket ratchet/driver. Turn it until it extends through
the hinge bracket and into the door. Ensure that the
plastic washer and door thimble are on the hinge pin.
Door Thimble
Plastic Washer
Center Hinge Pin
Center Hinge
Bracket
Door Thimble
D
Place foam pad onto top of refrigerator door to
help align the the freezer door while rehanging.
Installation Instructions
Door Stop
REHANG THE FREEZER DOOR
11
Lower the freezer door onto the center hinge pin.
A
Center Hinge Pin
B
Lift the top hinge so the pin fits into the door socket.
C
Support the door on the handle side and make sure
the door is straight and the gap between the doors is
even across the front. While holding the door in
place, tighten the top hinge screws.
Remove the foam pad.
D
21