Viewing The Connection Panel - Samsung LN-T4066F Manual De Instrucciones

Viewing the Connection Panel

Rear Panel Jacks
Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players.
For more information on connecting equipment, see pages 6-11.
1 AUDIO OUT
Connects to the audio input jacks on your Amplifier/
Home theater.
2 DIGITAL AUDIO OUT (OPTICAL)
Connects to a Digital Audio component.
3 PC IN
Connects to the video and audio output jacks on
your PC.
4 hDMI IN ,, /DVI IN(hDMI) (AUDIO R/L)
Connects to the HDMI jack of a device with an HDMI output.
Use the HDMI IN 1 jack for a DVI connection to an
external device.
You should use the DVI to HDMI cable or DVI-HDMI
adapter (DVI to HDMI) for a video connection,and the
DVI IN 'R-AUDIO-L' jack for audio.
- The HDMI IN 1 jack does not support PC connection
- No sound connection is needed for an HDMI to HDMI
connection
- When using an HDMI/DVI cable connection, you must use
the HDMI IN 1 jack.
5 ANT  IN/ANT  IN
Connects to an antenna or cable TV system.
6 Ex LINK
Connect this to the jack on the optional wall mount
bracket. This will allow you to adjust the TV viewing angle
using your remote control.
7 COMPONENT IN ,
Connects Component video/audio.
8 AV IN  / AV IN 
Video and audio inputs for external devices, such as a
camcorder or VCR.
S-VIDEO
Connects an S-Video signal from a camcorder or VCR.
9 POWER INPUT
Connects the supplied power cord
0 KENSINGTON LOCK
The Kensington lock (optional) is a device used to
physically fix the system when used in a public place.
If you want to use a locking device, contact the dealer
where you purchased the TV.
The place of the Kensington Lock may be different
depending on its model.
!
hEADPhONE
Connects a set of external headphones for private
listening.
@ WISELINK
Connect this to the jack on the optional wall mount
bracket. This will allow you to adjust the TV viewing
angle using your remote control.
English - 4
[Side Panel Jacks]