Operations; Initial Auto Preset - Sylvania 6427GFG A Manual Del Usuario

O
PERATIONS

INITIAL AUTO PRESET

This section describes the initial settings when you
first turn on the power after purchase. The initial
setting items are shown below.
NOTE:
Be sure that antenna or cable is connected properly before
plugging the power cord.
• D.S.T. (Daylight Saving Time)
You can set the air time display for digital broad-
casting. When you set this function to ON, the
date information adjusted for the area set by TIME
ZONE will be adjusted to the one added by anoth-
er 1 hour. In addition, the time difference will be
adjusted as follows: 2 a.m. on first Sunday in April
to 3 a.m., 1 hour ahead, and 2 a.m. on last
Sunday in October to 1 a.m., 1 hour behind.
• TIME ZONE
The EPG information in digital broadcasting is
adjusted based on the area set in TIME ZONE.
• AUTO PRESET CH (DTV/TV)
(When using antenna)
The channels broadcasted in DTV and TV are
automatically scanned and memorized. Only the
receivable channels in the area where this TV is
used will be memorized.
• AUTO PRESET CH (CATV)
(When using basic cable)
The channels broadcasted in CATV are automati-
cally scanned and memorized.
1 2
4 5
7 8
– /ENT
0
CH K / L
VOL
INPUT
MENU
SELECT
3
6
9
CHANNEL
RETURN
+ 100
CH
VOL
CH
VOL X / Y
SLEEP MUTE
1
Set the D.S.T. (Daylight Saving Time)
When you first turn on the power, the following
screen is displayed.
1. PLEASE CONNECT ANTENNA TO
THE UNIT.
2. SET UP THE ITEMS WITH
, AND BUTTONS.
D.S.T. (Daylight Saving)
TIME ZONE
AUTO PRESET CH(DTV/TV)
AUTO PRESET CH(CATV)
• Using [VOL X / Y ] on the remote control, set
"D.S.T. (Daylight Saving)" to [ON] .
1. PLEASE CONNECT ANTENNA TO
THE UNIT.
2. SET UP THE ITEMS WITH
, AND BUTTONS.
D.S.T. (Daylight Saving)
TIME ZONE
AUTO PRESET CH(DTV/TV)
AUTO PRESET CH(CATV)
2
Using [CH K / L ] on the remote control, select
"TIME ZONE".
1. PLEASE CONNECT ANTENNA TO
THE UNIT.
2. SET UP THE ITEMS WITH
, AND BUTTONS.
D.S.T. (Daylight Saving)
TIME ZONE
AUTO PRESET CH(DTV/TV)
AUTO PRESET CH(CATV)
• Every time you press [VOL X / Y ] on the remote
control, the area will be switched as below.
• Set your area.
NOTE:
You must set "D.S.T." and "TIME ZONE" before presetting
channels.
[- - -]
[- - -]
[ON]
[- - -]
[ON]
[- - -]
13
EN