Troubleshooting; Warranty - PowerSmith PGT140 Manual Del Operador

ACCESSORY AND REPLACEMENT PARTS
Replacement Spool Part Number ..................... PASTS180, PASTS180-2
Replacement Spool Cap Part Number ................ZPGT140P38
PROBLEM
Line will not advance when
using the Auto-Feed
Line wraps around drive
shaft housing and line head.
Motor fails to start when
trigger is depressed.
This product is warranted free from defects in material and workmanship for 3 years after date of purchase. This limited
warranty does not cover normal wear and tear or damage from neglect or accident. The original purchaser is covered
by this warranty and it is not transferable. Prior to returning your tool to store location of purchase, please call Toll-Free
Help Line for possible solutions.
THIS PRODUCT IS NOT WARRANTED IF USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES.
ACCESSORIES INCLUDED IN THIS KIT ARE NOT COVERED BY THE 3 YEAR WARRANTY.
BATTERY INCLUDED IS WARRANTED FOR ONE (1) YEAR AFTER DATE OF PURCHASE.
For questions about this or any other PowerSmith Product,
888-552-8665
Please call Toll-Free:
www.powersmithtools.com
Or visit our web site:
English
MAINTENANCE

TROUBLEShOOTINg

POSSIBLE CAUSE
Lines are welded to themselves.
Not enough line on spool.
Lines are worn too short.
Lines are tangled on spool.
Cutting tall grass at ground level.
Battery is not secure
Battery is not charged.

WARRANTY

.
13
SOLUTION
Lubricate with silicone spray.
Install a new spool or line. Refer to Spool
Replacement in this manual.
Manually pull line- Refer to Manual Feeding
the Cutting Line
Rewind the line-Refer to Line Replacement.
Cut tall grass from the top down to prevent
wrapping.
To secure the battery pack, make sure the
latches on the top of the battery pack snap
into place.
Charge the battery pack according to the
instructions included with your model.