Charging Battery - Multilaser Agata Manual Del Usuario

3.1. Charging battery

Please use travel adatpor to charge the battery:
(1) Connect usb cable with travel adaptor.
(2) Connect usb cable slot with mini usb slot of this device, and plug
the travel adaptor into the standard socket.
(3) When charging, battery level icon
full level after full charging.
(4) After full charging, pls timely cut off power adaptor with socket
and then disconnect this device with adaptor.
. In order to make battery be best performance, please charge and
discharge for more than 10 hours when you use the battery for the
first several times.
. After running out of battery, please charge on time .Over-discharging
will make battery damaged. And when device is charging, it is normal
phenomenon once it has slight heat.
. This device only supports to use special adaptor to charge. It can not
fully charge this device once you use other adaptor of PC or notebook.
After it turns off due to low power, it can be turned on after charging it
with 5-10 minutes. This is normal phenomenon.
User's manual
Manual do usuário . Manual del usuario
will appear. It will show
64