Hilti AG 125-19SE Manual De Usuario página 29

Suitability of discs for the equipment used
Item Equipment
A Guard
B Front cover (in
combination with
A)
C DG-EX 125/5" dust
hood for grinding
D DC-EX 125/5"C dust
hood for cutting (only
in conjunction with A)
E DC-EX 125/5"M dust
hood for slitting
F DC­EX SL adapter (in
conjunction with E)
G Side handle
H DCBG 125 hoop
handle (optional for
G)
I Clamping nut
J Clamping flange
K Kwik lock (optional
for I)
L Clamping nut for
abrasive resin-fiber
disc
M Support plate
5 Technical data
5.1 Angle grinder
Note
When powered by a generator or transformer, the generator or transformer's power output must be at
least twice the rated input power shown on the rating plate of the power tool. The operating voltage of
the transformer or generator must always be within +5% and -15% of the rated voltage of the power
tool.
The information given applies to a rated voltage of 230 V. The data may vary in the event of deviations
from the rated voltage and for country-specific versions. Please refer to the power tool's type
identification plate for details of its voltage, frequency, current and input power ratings.
Rated power input
Rated speed
Maximum disc diameter
Thread diameter
Thread length
Weight in accordance with EPTA proce-
dure 01/2003
AC­D AG­D,
AF­D, (SPX, SP,
AN­D
X X
X —
— —
— —
— —
— —
X X
X X
X X
X X
X X
— —
— —
AG 125-19SE
1,900 W
11,500 /min
125 mm
M14
22 mm
2.5 kg
DG-CW DC-TP,
DC-D
P) (SPX, SP,
P)
X X
— X
X —
— X
— X
— X
X X
X X
X X
X X
— X
— —
— —
AP-D 3CS, 4CS,
3SS, 4SS,
DD-M14
X X
— —
— —
— —
— —
— —
X X
X X
— —
— —
— —
X —
X —
English 23