Axxess CHTO-013 Manual Del Usuario página 3

• Connect the Gray wire to the right front positive speaker output of the
aftermarket radio.
• Connect the Gray/Black wire to the right front negative speaker output of the
aftermarket radio.
• Connect the Green wire to the radio's left rear positive speaker output.
• Connect the Green/Black wire to the radio's left rear negative speaker output.
• Connect the Purple wire to the radio's right rear positive speaker output.
• Connect the Purple/Black wire to the radio's right rear negative speaker output.
From the 22-pin Chrysler harness
Note: Use appropriate harness for your vehicle application as shown in
Applications, p.2.
• Connect the Yellow wire to the radio's 12-volt battery or memory wire.
• Connect the Black wire to the radio's ground wire.
• Connect the Blue/White wire to the radio's amp turn on wire if populated on
the factory side.
For non-amplified vehicles (only), make the following connections:
• Disconnect the (2) 4-pin connectors, with the Purple and Green wires in it.
• Connect the 4-pin harness with stripped leads to the 4-pin connector, with
the Purple and Green wires, coming from the Gray 22-pin connector.
CHTO-013
Connections to be made
• Connect the Green wire to the radio's left rear positive speaker output.
• Connect the Green/Black wire to the radio's left rear negative speaker output.
• Connect the Purple wire to the radio's right rear positive speaker output.
• Connect the Purple/Black wire to the radio's right rear negative
Tip: If you are unsure if your vehicle is amplified or not, note that these following
wires will only be populated in the factory harness if non-amplified.
• Connect the White wire to the left front positive speaker output of the
• Connect the White/Black wire to the left front negative speaker output of the
• Connect the Gray wire to the right front positive speaker output of the
• Connect the Gray/Black wire to the right front negative speaker output of
From the 12-way harness
• This harness is for the ASWC-1 (sold separately). Please refer to the ASWC-1
Continued on next page
3
speaker output.
aftermarket radio.
aftermarket radio.
aftermarket radio.
the aftermarket.
instructions for programming.