4³⁄4"
4³⁄4"
10⁷⁄8"
23⁹⁄16"
Fig. 3
Fig. 4
4. Mark and cutout a through-hole on the wall according to
the dimensions outlined in Fig. 3.
5. Connect the vent hood white wire negative (-) to the
incoming power supply negative (-) wire and the vent
hood black wire positive (+) to the incoming power supply
positive (+) wire. (Fig 5)
NOTE: Make all electrical supply connections in
accordance with local and/or applicable codes.
Operation
Fan Control
Press the fan button once to turn on the fan, press twice to
turn off. (Fig. 10)
Fig. 10
Cleaning and Maintenance
Before carrying out any maintenance or cleaning isolate the range hood from the mains supply.
The cooker hood must be kept clean, as a build up of grease or fat can be a fire hazard.
3³⁄4"
⁵⁄8"
3³⁄4"
⁵⁄8"
Range Hood
10⁷⁄8"
Range Hood
Outline
Outline
23⁹⁄16"
19¹⁄2"
Center of
Center of
Range Hood
Range Hood
19¹⁄2"
Fig. 5
6. Insert vent collar at back of the range hood into the cutout
area and fix the range hood onto the top cabinet with the
four screws provided. (Fig. 6 and Fig. 7)
NOTE: DO NOT over tighten the screws.
Fig. 6
7. Verify that the blower housing and ductwork are free of
debris and fan blades spin freely.
8. Replace the grill cover to the range hood and press the
release tabs until you hear a click. (Fig. 8) The grill cover is
securely attached to the range hood. (Fig. 9)
Fig. 8
Light Control
Press the light button once to turn on the light, press twice to
turn off. (Fig. 11)
Fig. 11
WARNING
Fig. 7
Fig. 9
5