Using Your Nebulizer - Veridian Healthcare 11-503 Manual De Instrucciones

USING YOUR NEBULIZER

Before the first use of the nebulizer of if the unit has not been used for an extended period of
time, it should be cleaned thoroughly as described in the Cleaning and Disinfection section of
this manual.
The patient receiving treatment should be seated or slightly
reclined in a comfortable position as treatments take several
minutes. Keep in mind that the nebulizer cup must remain
vertical during treatment.
1. Place the compressor unit on a flat, stable surface within
operating range of the patient and an electrical outlet. Ensure
that the air vents on the side of the unit housing are not
blocked or obstructed.
2. Plug the power cord into the electrical outlet.
3. Slide the cover back to expose the Power switch and hose
connector, Fig. 1.
4. Attach one end of the air tube to the tube connector inside
the accessory compartment, Fig. 2. Turn on the power briefly
to ensure that the unit is functioning properly and test that air
is coming through the tubing, then turn the power off.
8 • ENGLISH
Fig. 1
Fig. 2