Slide Switch - CONCORD Eye-Q Go 2000 Manual Del Usuario

SLIDE SWITCH

The camera has a Slide Switch that has 3 image taking modes:
macro ( ), portrait (
displayed in the upper left corner of the LCD.
Slide Switch
Position
Macro ( )
Portrait ( )
Distant ( )
Using the slide switch:
1. Position the Slide switch towards the macro (
portrait ( ) or distant (
clicks into place. (fig.2.7)
2. To ensure accurate focus, refer to the chart above to
make sure that the subject is within the distance
range in the mode that you selected.
Note: The default flash mode is set by the Slide Switch. To manually
override the slide switch flash mode, the setting must be changed on the
Flash menu on the LCD. Please refer to p. 25 for further information.
) and distant (
Flash Status
Auto Flash ( )
A
Auto Flash ( )
A
No Flash ( )
) icon until the switch
). The current flash setting is
Conditions
Use this option to
take close-up
photography.
Use this option in
variable lighting
conditions. The
camera will
automatically detect
when the flash is
needed.
Use this option in
outdoor or bright
light conditions.
),
19
Distance from
subject
2.2ft. (0.65m) to
4.7ft. (1.4m)
4.7ft. (1.4m) to
10.8ft. (3.2m)
4.7ft. (1.4m) to
infinity
fig.2.7