CBX FOLDABLE CARRYCOT Manual Del Usuario página 6

EN
Pull the cot upper frame upwards.
1
Move the 2 metal bars into the plastic pieces on the bottom of the cot, until you hear a „click".
2
Move the adapter parts by pushing the button on carry handle. It is ready installed if you hear a
3
"click" noise.
Put the cotliner in the cot.
4
Put the mattress on the bottom of the cot.
5
Use the apron to protect your child against wind and bad weather conditions.
6
To fix the apron on the cot please use the press buttons like shown in the picture when the hood
7
is up.
Place the adapter on the carrycot into the attachment points on the frame and press the carrycot
8
downwards until you hear a „click" on both sides.
Check if the carrycot has been installed securely by trying to lift it from the frame.
Please use the carrycot only in allowed position.
9
Slide the unlocking buttons upwards until you hear a click on both sides. The carrycot is now
10
unlocked. Take the carrycot firmly by the handle on the hood and remove it from the frame in a
vertical movement.
The hood can be unfolded by moving it upwards.
11
Push the buttons on the sides of the hood. The hood can now be folded downwards.
Make sure that the hood of the carrycot has been unfolded completely.
12
Place the rain cover from top to bottom over the carrycot and make sure that the raincover
attaches well all around the bottom of the carrycot.
Important — Keep these instructions for future reference.
Compatible with BIMISI & LEOTIE.
Warnings, safety instructions, maintenance, disposal and guarantee can be found in the warnings
booklet.
6
INSTRUCTIONS