Technical Data - BOMANN HT 1844 CB Instrucciones De Servicio

Use
Switch the appliance on by pushing the left hand switch on
the handle upwards. The pilot lamp lights.
Select an air stream level on the handle (left hand switch):
Position O: off
Position I:
gentle stream of air
Position II: strong stream of air
Setting the temperature level (right hand switch):
Position : low temperature
Position Eco: medium temperature for gentle drying and
shaping.
Position : high temperature for rapid drying.
COOL SHOT (Cold Air)
With this switch you can stop the heating process.
Hold the button down in this position according to the desired
interval length. When the button is released it returned
automatically to the initial position.
WARNING:
• Before cleaning remove the mains lead from the socked.
• Under no circumstances should you immerse the device in water
for cleaning purposes. Otherwise this might result in an electric
shock or fire.
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
Clean the housing with a soft, dry cloth without additives.
Air Intake Grill
Please clean the grill on the air intake side of the hair dryer
regularly in order to avoid excessive temperatures as a result
of heat accumulation.
1. Press the upper edge of the air intake grill lightly and flip
it open.
2. Remove any existing contamination.
If necessary, use a fine brush.
3. Close the air intake grill again.
HT1844CB_IM
Ionizing Function –
Reduction of Static in Hair
The appliance is also fitted with an ionizer which gives off
negative ions with the air flow when switching on. This pro-
cess supports safe, gentle drying of hair and also promotes
a better hair structure, maximizes hair volume, provides for a
silky finish and also reduces static in the hair.
This process is particularly gentle on stressed hair.
Switch-off
Set the left hand switch to "O" after use and disconnect from
the mains.
Storage
• Leave the device to cool before putting it away!
• Hang the device up by the suspension eye.
Mains Cable
• The mains cable should only be wound up loosely.
• Never tie the cable tightly round the device, as over time
this may result in the cable breaking.
• Check the mains cable regularly for damage.
Cleaning
Model:.................................................................... HT 1844 CB
Power supply:......................................................230 V~, 50 Hz
Power consumption: ..................................................... 2100 W
Protection class: ......................................................................
Net weight: .......................................................................0.5 kg
The right to make technical and design modifications in the
course of continuous product development remains reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest regulations.

Technical Data

28.01.16
25