Cleaning And Maintenance - cecotec Pure Aroma 300 Yin Manual De Instrucciones

ENGLISH
b. Remove the upper lid and pour out the remaining water from inside
c. Gently shake the unit and allow it to dry naturally for, at least, 24 hours
Note: if the device runs out or there is not enough water, the diffuser and its light indicators will
automatically turn off.
WARNINGS:
• Do not add water while the product is operating.
• Do not use water over 40 ºC.

4. CLEANING AND MAINTENANCE

After each 5-6 uses, follow the below steps to clean it:
• Unplug the product from the power supply and remove the upper lid.
• Pour out any remaining water through the emptying nozzle.
• Use a soft, damp cloth with some cleaning agent to clean the diffuser's outside.
• If the inside part is dirty, remove the inner cover to clean it.
• Do not use alcohol or abrasive detergents to clean the product as these could damage the
surface.
• If the product is not going to be used for a long time, pour out the remaining water and store
it in a safe place.
Warning: do not pour the remaining water through the air inlet or any other part. Water can only
be poured through the water outlet in order to avoid product damage.
14 PURE AROMA 300 YIN