Publicidad
5. Now set the stone lavatory on the bracket/cabinet. Mark the wall along the top of the stone.
Locking pins at 22" spread
to meet with pre-drilled holes
in stone top. Locking pins prevent
stone top from tipping forward.
Stone top is secured to vanity
and back wall by silicone. This
will keep the stone top from sliding
out of the locking pins.
6. Remove the lavatory from the bracket/cabinet and measure the distance from the top of the stone
to the center of the mounting holes for the locking pins.
7. Mark location of the mounting holes on the wall, drill holes, and install lag bolts to lock the stone lavatory.
8. Lastly, use silicone on the back of the lavatory and place onto the cabinet/bracket sliding the stone onto
the locking pins.
Installation Instructions
4
Additional wall studs
at 22" spread to line
up with pre-drilled holes
in bracket and pre-drilled
anchors in stone sink
LACAVA LLC
Publicidad
