Monster SmartView 300L Guía Del Usuario Y Garantía página 20

Adjusting Your TV's Tilt and On-Wall Height
Tilting Your TV:
1) With a person on each side of the TV, turn the Pull 'n' Twist
downward as far as you can. This loosens the tilting adjustment bars
and initiates tilt.
2)
To further loosen the adjustment
bars and increase ease of tilt, pull
outward on the round portion
of the handle. This initiates its
ratchet mechanism.
3)
In ratchet mode, turn the handle
upward to its highest point.
4)
Release the handle to disengage
ratchet mode. When handle clicks
into place, it's ready to be turned
downward again. Repeat Step 1.
5) To prevent stress on TV, ensure both
bars are tilted at the same angle.
6) To lock the bars into place at the
desired angle, do the reverse of the
steps above. Turn the handles
upward and ratchet as needed
until the bars are secure.
16
handles
™
� � �
���� ��� �����
������ ��� ����