Specifications - Insignia IS-CM100641 Guia Del Usuario

IS-CM100641_Combined.fm Page 9 Friday, April 8, 2005 9:34 AM
IS-CM100641 17-inch Color Monitor
Icon Control
Status
H.Moire
V.Moire
Language
Recall
Using Self Diagnosis
If the monitor does not display, press any key and the Self Diagnosis screen
opens. Self Diagnosis checks the status of the monitor and determines
whether there is a valid signal.
NO SIGNAL
OUT OF RANGE

Specifications

These specifications can change without any prior notice.
CDT Size
Diagonal visible image area
Synchronization—Horizontal
Synchronization—Vertical
Plug and Play
Power Saving
Function
Display horizontal and vertical frequency and
polarity.
Adjust the horizontal picture moire
cancellation.
Adjust the vertical picture moire cancellation.
Select the language for the OSD (six
languages available).
Reset the screen to the factory settings.
The No Signal screen opens when the VGA
connector is not connected to a computer or when
the monitor is in DPMS mode.
The Out of Range screen opens when the applied
frequency is under or over the normal frequency
range.
Normal range
H: 30-70 KHz
V: 50-160 Hz
17 inch
16 inch
30-70 KHz
50-160 Hz
VESA DDC compatible
EPA, VESA DPMS, Nutek compliant
www.insignia-products.com 9