Insignia IS-CM100641 Guia Del Usuario página 6

IS-CM100641_Combined.fm Page 4 Friday, April 8, 2005 9:34 AM
4 Insert the hooks into the guide holes.
5 Slide the tilt/swivel stand toward the front of the monitor until the latch
snaps into place.
6 Turn the monitor and the stand upright.
To remove the tilt/swivel stand:
1 Make sure that the power is turned off to the monitor.
2 Set the monitor face down with the underside facing you. Be careful to
not to scratch the monitor screen.
3 Press the latch, then pull the tilt/swivel stand toward the back of the
monitor.
4 Pull the stand away from the monitor.
4
www.insignia-products.com
IS-CM100641 17-inch Color Monitor
Latch