SUOMY GLIDER Instrucciones De Uso página 25

EN
GENERAL RULES
Do not use a helmet that suffered severe blows even though the damage is not readily visible; if the helmet is
damaged it must be replaced.
The helmet object of this manual is a device for personal protection class II, or devices that are neither
of simple design nor of complex design, and for this reason was submitted to the procedure of CE
certification, Article 10 of the European directive 89 / 686 / CEE and further amendments directives
93/95 and 93/68 and 96/58 CEE.
It is extremely dangerous to modify the helmet by sticking or gluing anything on it. Do not cut or punch the
helmet's shell, do not insert screws or paint it.
Do not change the internal lining of the helmet, particularly never cut or change the inside polystyrene padding:
changes to the shape of the internal polystyrene shell can affect the safety features of the helmet.
PEFORMANCES
Maximum impact acceleration guaranteed, tested in laboratory conditions: Max 250 g.