EN
USE AND MAINTENANCE
TRANSPORT
Given the type of device (helmet) no particular instructions are necessary for its transport.
INSTRUCTIONS FOR USE
CORRECT POSITIONING OF THE HELMET
The helmet must be worn properly to properly protect the forehead without obscuring the view (pic. 1).
Do not push the helmet too much to the back of the head as the forehead will be unprotected (pic. 2).
The helmet is available in different sizes. Try and choose the one that fits best on your head.
IMPORTANT: All adjustments, depicted in this manual's following paragraphs, should be made for the helmet to
be worn properly; otherwise the helmet will not fit. Correct adjustment of the helmet allows it to remain stable in
case of an accident.
FASTENING SYSTEM
FASTENING AND UNFASTENING OF BUCKLE - (see pictures 2 A/B)
After wearing the helmet, make sure that the buckle is fastened correctly.
Insert the two prongs into the slots as shown in Figure 2 A and make sure that the two clips are locked. Gently
pull in the opposite direction to check for a secure fastening of the buckle.