Publicidad
Idiomas disponibles
Idiomas disponibles
INSTASTART™
Electronic Ignition Stove
■ Set on
sturdy, flat
surface. For
outdoor
use only.
■ Open burner
valve and
rotate ignitor
knob several
times until
burner
lights. (Fig.
12 and 13).
Note: If igniter
fails to light
stove, use
match to light
burner. If the
stove is wet the igniter may not spark.
■ Adjust flame
with burner
valve.
Flame
should be
blue with
a hint of
yellow
on tips.
To Turn Off
■ Close both
burner
valves firmly.
To Clean
■ Make sure stove
is cool.
■ Move stove
away from flame
(including pilot
lights) and other
ignition sources.
Fig. 12
■ Remove propane
cylinder from
regulator
and replace
protective cap
on cylinder.
■ Remove
regulator from
Fig. 13
stove. (Fig. 17)
■ Lift off pot
support. (Fig. 18)
Fig. 14
• Keep stove area clear and free from
combustible materials, gasoline and
other flammable vapors and liquids.
• Do not obstruct the flow of
combustion and ventilation air.
• A good flame should be blue with
minimal yellow tip. Some yellow tips
on flames are acceptable as long as
no carbon or soot deposits appear.
• Wipe clean with soft cloth and mild
dish detergent. Do not use abrasives.
Fig. 15
English - 5
MAINTENANCE
Fig. 16
Fig. 17
Fig. 18
Fig. 19
Publicidad
