Led Indicator - Level One FEP-0931 Guía De Instalación Rápida

LED Indicator

LED Status Explanation
PWR Green Lit when Power is available.
Lit when the connected port(s) is/are PSE
Yellow
starts to supply power
POE
P1~P8 Off when the connected port(s) is/are PSE
OFF
stop power supply
Lit when there is/are network device(s)
Green
L/A connect the corresponding port(s)
P1~P9
Blink when the corresponding ports is(are)
Blink
transmitting data flows
SPD
Green Data rate is 100Mbps
P9
OFF Data rate is 10Mbps
Automatically adjust the network
Auto-mode transmission rate according to the length of
network cable.
Forced downlink port rate is 10M，Support
10M
250 meters long distance transmission
Two bits
Automatically adjust the network
DIP
VLAN& transmission rate according to the length of
switch
Auto-mode network cable. Support downlink port
isolation, only uplink port communication
Forced downlink port rate is 10M,Support
VLAN& downlink port isolation and 250 meters
10M long distance transmission, only uplink port
communication