How The Cleaner Works - Kokido K900CBX Manual Del Propietário

HOW THE CLEANER WORKS

The cleaner has two adjustable propelling nozzles on both ends. Water is first sucked in
from the bottom (suction nozzle on both ends) of the cleaner, goes through the mesh
filter plate and is then discharged from the propelling nozzle. Water jetting from the
nozzle propels the cleaner forward. Propelling nozzles are opened alternately so that
the cleaner moves back and forth on the pool floor. While moving, cleaner bottom will
suck and store the debris inside (underneath the mesh).
Setting the propelling nozzles to different degree markings (0°..20°..40°) will allow the
cleaner to move in different patterns. The cleaner moves approximately in a straight
line when the nozzle is positioned at 0°. Setting the propelling nozzle position to other
degrees will make the cleaner turn to left / right and move along a radian path
depending on the propelling nozzle direction. The larger the degree the propelling
nozzle is positioned on, the larger the radian path the cleaner will follow.
NOTE: Cleaner DOES NOT automatically reverse upon contact with the pool wall. The
cleaner's forward & backward movement duration varies according to the settings
under "CYCLE" mode.
8