How The Robot Works - Kokido RC 16 Manual De Usuario

HOW THE ROBOT WORKS

2
8
11
7.3
7.1
The robot has a water-propelling nozzle at the bottom of the swivel head. Water is first sucked in through the suction mouth
at the bottom of the robot, which then goes through the filter and is discharged via the propelling nozzle. Water jetting from the
nozzle propels the robot forward. Once the robot stops against an obstacle such as the pool wall, its side flap sways and its
swivel head turns 180˚, allowing the robot to move in the opposite direction. The robot moves in a generally straight pattern in
one direction and in an arc pattern in the other direction. The robot vacuums the pool bottom as it moves, collecting debris in
its compartment.
Remark: Product/parts photos/drawings in this manual are for demonstration only. Product/parts in photos/drawings may vary
with the model purchased.
3
14
1
3
4
5
6
12
9
10
7.2 1.5 1.1
1.4 1.2
1
1.1
1.2 Power indicating light
15
1.3
1.4
1.5
16
2
3
Swivel smoothening-ring
17
4
Swivel head bottom
5
6
7
Complete base
7.1
13
7.2
(underneath the base at wider end)
7
7.3
8
9 Rear wheel x 2
10
Small wheel x 2
11
12
Suction mouth flap
13
Draining filter flap x 2
14
1.3
15
(with V-clip) for Telescopic pole)
16 Charging cable
17
Swivel head
smoothening-ring, protective
(with side flap)
cap & bottom screw plate:
Sliding switch
Water sensors
Charging port
Protective cap
(for charging port)
Side flap
(with side pin)
Top cover
screw plate
Filter cover
Grip
(on swivel head)
Grip
Grip indicator
Locking pin
Front wheel
Float
Hook
Adaptor
Replacement
Parts number
Including float, swivel
RC16ASM01
RC16ASM01/US
(USA)
---------
---------
---------
---------
---------
RC16-07
RC35-08-004R
RC16ASM02
RC30-05-005
RC16-09
RC16-10
RC16-10/US
(USA)
---------
---------
---------
RC16-10-015
RC16ASM03
RC16ASM04
RC26-15
RC30-16
RC16-17-001
K96900163/EU
(EU)
EV1000163/US
(USA)
K96900163/AU
(Australia / New Zealand)