Radio; Cd Player - Philips AZ2770 Manual De Instrucciones

RADIO

RADIO RECEPTION
1. Press POWER to on position.
2. Press TUNER source button.
– The TUNER indicator lights up.
3. Adjust BAND to select the desired FM/ AM waveband.
4. Tune to a radio station using the tuning knob.
– For FM, pull out the telescopic antenna. Incline and turn the
antenna. Reduce its length if the signal is too strong (very
close to a transmitter).
– For AM, the set is provided with a built-in antenna so the
telescopic antenna is not needed. Direct the antenna by
turning the whole set.
5. Adjust the sound using VOLUME and DBB.
6. Press POWER again to switch off the set.
– The TUNER indicator goes out.
DISPLAY INDICATION FOR CD FUNCTIONS
CD door open
d1SC
CD inserted
– In stop mode total track number and total playback time
– During CD
playback elapsed playback time of current track and
current track number
– PAUSE elapsed playback time freezes and flashes
when CD program active;
also appears briefly when you store a track
no SEL
program activated but no tracks selected
program cancelled/ PROG pressed for more
than 2 seconds
no d1SC
no disc/error in CD operation or with the
CD (see Troubleshooting)
FULL program memory full
– SHUFFLE/ REPEAT
modes when the respective mode is activated

CD PLAYER

CD
TU NE R
CD
TU NE R
TA PE
PR OG
ST OP
SE AR CH
PL AY /PA US E
BA ND
CD
CD
CD
SHUFFLE
REPEAT CD
11