Care And Maintenance - Levenhuk Ra 150C Guia Del Usuario

Specifications
Optical design
Optics material
Optics coating
Primary mirror shape
Primary mirror diameter (aperture), mm / in
Secondary mirror shape
Focal length, mm
Focal ratio
Highest practical power, x
Resolution threshold, arcseconds
Limiting stellar magnitude
Drawtube travel
Baffles
Backfocus distance
Focuser
Eyepiece barrel diameter
Tube-mount assembly system
Optical tube material
2" Extension ring
1" Extension ring
Dust cover
Operating temperature range, °C / °F
The manufacturer reserves the right to make changes to the product range and specifications without prior notice.

Care and maintenance

• Never, under any circumstances, look directly at the Sun through this device without a special filter, or look at another
bright source of light or at a laser, as it may cause PERMANENT RETINAL DAMAGE and may lead to BLINDNESS.
• Take the necessary precautions when using the device with children or others who have not read or who do not fully understand
these instructions.
• Do not try to disassemble the device on your own for any reason. For repairs and cleaning of any kind, please contact your local
specialized service center.
• Stop using the device if the lens fogs up. Do not wipe the lens! Remove moisture with a hair dryer or point the telescope
downward until the moisture naturally evaporates.
• Protect the device from sudden impact and excessive mechanical force.
• Do not touch the optical surfaces with your fingers. Clean the lens surface with compressed air or a soft lens cleaning wipe. To
clean the device exterior, use only the special cleaning wipes and special tools that are recommended for cleaning the optics.
• Store the device in a dry, cool place away from hazardous acids and other chemicals, away from heaters, open fire, and other
sources of high temperatures.
• Replace the dust cap over the front end of the telescope whenever it is not in use. Always put eyepieces in their protective
cases and cover them with their caps. This prevents dust or dirt from settling on the mirror or lens surfaces.
• Lubricate the mechanical components with metal and plastic connecting parts. Components to be lubricated:
• Optical tube;
• Fine mechanics (focuser rail, telescope optical tube microfocuser);
• Mounting;
• Worm-and-worm pairs, bearings, cogs, threaded mounting gears.
Use all-purpose silicon-based greases with an operating temperature range of −60 ... +180°С (−76 ... +356°F).
• If a part of the device or the battery is swallowed, seek medical attention immediately.
• Children should use the device under adult supervision only.
Levenhuk International Lifetime Warranty
All Levenhuk telescopes, microscopes, binoculars, and other optical products, except for their accessories, carry a lifetime
warranty against defects in materials and workmanship. A lifetime warranty is a guarantee on the lifetime of the product on the
market. All Levenhuk accessories are warranted to be free of defects in materials and workmanship for six months from the
purchase date. The warranty entitles you to the free repair or replacement of the Levenhuk product in any country where a
Levenhuk office is located if all the warranty conditions are met.
For further details, please visit: www.levenhuk.com/warranty
If warranty problems arise, or if you need assistance in using your product, contact the local Levenhuk branch.
150C Cassegrain OTA
Cassegrain reflector
quartz
SiO₂ (silicon dioxide) 92~96% coating
paraboloid
153 / 6
hyperboloid
1836
f/12
304
0.76
13.6
41mm (laser-engraved millimeter scale)
8 internal knife-edge baffles
157.2mm (from end of 2" focuser collar)
2'' dual-speed Crayford
1.25/2''
dovetail plate
rolled steel
1pc
2pcs
1pc
−5... +35 / 23... 95
5