Operation; Before Use - LG STYLER S3RERB El Manual Del Propietario

OPERATION

BEFORE USE

Clean the Styler.
Clean the Styler thoroughly and wipe off all dust that accumulated during shipping.
See Maintenance, page 37. Do not plug in or operate the appliance until the
interior and exterior have thoroughly dried.
y Do not scratch the Styler with a sharp object or use a detergent that
y Do not peel off the model or serial number label or the technical information
Remove adhesive residue by wiping it off with your thumb or dish detergent.
Unpack accessories.
Unpack the shelf and hangers. For instructions on installing or using accessories,
see Loading the Styler, pages 25-28. Accessories can be purchased separately
from the LG Customer Information Center. Call 1-800-243-0000 (USA) or
1-888-542-2623 (Canada).
Assemble the drip tray.
Insert the drip tray at the bottom of the cabinet. See
Assembling the Drip Tray, page 18.
Connect the power supply.
Check if the power supply is connected before use.
Wash dirty clothes if necessary before putting them in the
Styler.
The Styler does not have a washing function. Stains and loose dirt from
one item may transfer to others during a cycle. Wash or brush off dust
and dirt, or spot-clean items, to avoid setting stains or transferring dirt or
odors.
CAUTION
contains alcohol, bleach, a flammable liquid or an abrasive when removing
any tape or adhesive from the Styler,.
on the rear surface of the Styler.
NOTE
OPERATION 19