Introduction To Your Machine; Description Of The Kettle; Before Using For The First Time; Using Your Machine - Brandt BO1200ER Manual De Instrucciones

2) INTRODUCTION TO YOUR MACHINE

a)

Description of the Kettle

Never open the lid when the water is boiling
Avoid contact with the steam from the spout
b) Before Using for the First Time
Before using your kettle for the first time or if you have not used it for a long time, fill it up to
the maximum level and boil the water, in compliance with the instructions in the following
paragraph. Then discard the water, Repeat 2 or 3 times.

3) USING YOUR MACHINE

a)

Filling the Kettle

 Place the machine on a dry, flat, stable surface.
 Remove the kettle from the base. Open the lid by pressing the opening push-button (2)
and fill the kettle with water.
 The quantity of water can be seen through the water level (3). It must never be less than
the MIN mark or more than the MAX mark. Caution, if the kettle is overfull water may be
ejected when boiling.
 Close the lid and put the kettle on its base.
b) Connection and Prior Installation
 Close the lid so the seal is hermetic.
 Put the kettle on its base. Unroll the lead and plug the machine in.
1. Lid
2. Lid opening push-button
3. Water level indicator
4. Handle
5. On/Off button
6. Temperature selection button
7. Programme selection button
8. Power supply base
9. Machine body
10. Spout
11. Anti-limescale filter
18