Extra Functions; Delete Timer - Philips SBCRU880/00C Instrucciones De Manejo

7 Press the SMART key to indicate the end of the string.
– The LCD displays OK for a second and then returns to normal operation.
– Press the keys in the sequence that you want your equipment to respond.
– The THEATRE key, SMART key and back-lighting key cannot be programmed as
macro keys.

4. EXTRA FUNCTIONS

4.1 TIMER
The SBC RU880 has a built-in timer that can be used to organise time blocks to
switch on or off your TV or to set up your VCR for recording. This timer can also
be used to operate a Philips Power Control system.
If you want to set up the timer for example to record your favourite programme
every Monday at 7.p.m., just:
1 Press the SMART key (for about three seconds) until the LCD displays
TIMER.
2 Press OK.
– The LCD displays ADD TIMER, and the SBC RU880 is now in timer set-up
mode.
3 Press OK.
– The LCD displays ONCE.
4 Press Cursor up or Cursor down to choose between ONCE, DAILY and
WEEKLY (Select WEEKLY in this case).
5 Press OK.
– The LCD displays START : .
6 Key in the time using four digits (choose 19:00 in this case). Press Cursor
left or Cursor right to go back and forth to correct.
7 Press OK.
– If you have chosen Once or Weekly, the LCD displays MON.
8 Press Cursor up or Cursor down to choose one of the week-days (Monday in
this case).
9 Press OK.
– The LCD displays ENTER KEYS. You can now enter the sequence of keys
you want to transmit at a certain point in time e.g. VCR, B, Digit (2), REC.
0 Press the SMART key to indicate the end of this macro.
– The LCD displays OK for a second and then returns to normal operation. The
timer symbol should light up.
That's it! You have now programmed your VCR to record your favourite Channel
2 programme at 7.p.m. every Monday night.
– If you have chosen the AM/PM clock, the LCD displays PM.
• Press Cursor up or Cursor down to choose between AM and PM.
• Press the SMART key to leave this mode and go back to normal mode.
– As soon as the last timer-block is transmitted, the timer-symbol should go off.
– Total number of timers and macro's should not exceed 8. Maximum number of
keys per macro should be 10.

4.2 DELETE TIMER

To delete the timer function:
1 Press the SMART key (for about three seconds) until the LCD displays
TIMER.
2 Press OK.
– The LCD displays ADD TIMER and the SBC RU880 is now in timer set-up
mode.
3 Press Cursor up or Cursor down until the LCD displays DEL TIMER.
4 Press OK.
– The LCD displays (DAY) (Once/Weekly) (TIME) or (DAILY) (TIME).
(This means day and time of the first programmed timer-block).
5 Press Cursor up or Cursor down to select between the several programmed
timer-blocks.
– The day and time of those timer-blocks will then be displayed.
6 Press OK to delete the chosen timer-block.
– The SBC RU880 returns to normal operating mode.
NOTE: When the last programmed timer-block is deleted the timer-symbol goes off.
NOTES:
NOTES:
11